Our MFT Style terminal provides 500 amp continuous current performance, the ability to be mounted to panels of any material or thickness and retains the same 2,000 volt rating, IP68 sealing capability and nickel plating option as the lower power members of our battery terminal family. The MFT can accept the same snap-on rigid or flexible covers as our LFT and SFT Style terminals. Equipping your design with these watertight, single pole, wrench disconnect battery terminals will enable system integrators to easily incorporate your modules into the MicroGrid, Reserve Power, Vehicle Electrification or APU systems the end-user requires, regardless of battery chemistry.

Whether you are coupling batteries or power conversion modules together for a reserve power or automotive system or making internal connections for an AC power distribution installation, our 500 amp MFT Style terminals, Covers and Accessories were designed with your application in mind.

Electrical Information

  • Rated Current 500 amps
  • Peak Current 3,000 amps
  • Rated Voltage 2,000 volts

Mechanical Information

  • Maximum Wire Size 450MCM (230 mm2)
  • Environmental Sealing IP68
  • Operating Temperature -40° C to +125° C
  • Flammability Rating UL94 5VA

Commercial Information

  • MFT-B-B Unplated, Black Insulator
  • MFT-B-R  Unplated, Red Insulator
  • MFT-P-B Nickel Plated, Black Insulator
  • MFT-P-R Nickel Plated, Red Insulator
  • 698A1789-S-B Short Snap On Cover (1.44” OAL), Black
  • 698A1789-S-R Short Snap On Cover (1.44” OAL), Red
  • 698A1789-L-B Long, Small Gauge Snap On Cover (2.23” OAL), Black
  • 698A1789-L-R Long, Small Gauge Snap On Cover (2.23” OAL), Red
  • 713A1806-B Flexible Snap On Cover (3.75″ OAL), Black
  • 713A806-R Flexible Snap On Cover (3.75″ OAL), Red
  • 716A1815 Gasket

Downloads:

  • Download
    Spec Sheet
  • Download
    Drawing
  • Download
    STEP
  • Please fill out the form to download the files.

     

    Please fill out the form to download the files.

Event Tracking done Conversion Tracking done