Our XFT copper feed through terminal is rated at 1,000 amps and 2,000 volts, can take a peak current of 5,000 amps and is designed for mounting to the steel or aluminum panels found in switchgear, panelboards, power cabinets, and control panels. The copper core of this through panel connector is nickel plated to cope with the harsh environments found in outdoor enclosures and remains cool at extreme DC charge or discharge cycles or AC switching rates. Equipping your design with these single pole, pass through terminals will enable integrators to incorporate your products into their power conditioning or distribution panel systems.

Our double-ended female threaded electrical termination scheme eliminates the shorting hazard of male threaded posts and delivers more than twice the torque strength of a threaded post to avoid potential damage inflicted by over-zealous end users. Flexible snap-on covers provide touch safety both before and after cables have been attached to our power pass through connector.

Electrical Information

  • Rated Current 1,000 amps
  • Peak Current 5,000 amps
  • Rated Voltage 2,000 volts

Mechanical Information

  • Maximum Wire Size 750 MCM
  • Environmental Sealing IP68
  • Operating Temperature -40° C to +125° C
  • Flammability Rating UL94 5VA

Commercial Information

  • XFT-N-B Nickel Plated Copper, Black Insulator
  • BFT-N-R Nickel Plated Copper, Red Insulator
  • 639A1830-R Elastomeric Boot, diameter cable opening .81, Black
  • 639A1830-B Elastomeric Boot, diameter cable opening .81, Red
  • 718A1817 Gasket


  • Download
    Spec Sheet
  • Download
  • Please fill out the form to download the files.


    Please fill out the form to download the files.

Event Tracking done Conversion Tracking done