Our 750 amp BFT Style terminal consists of a nickel-plated brass core which stays cool at 750 amps of continuous current or when charge and discharge currents hit short term peaks of 4,000 amps. These small footprint terminals are designed for the temperature sensitive environment of lithium battery cells and the charging rates of ultracapacitors and supercapacitors. Equipping your power module with these watertight, single pole, wrench disconnect copper battery terminals will facilitate the incorporation of your modules into cutting edge GenSet, APU or Vehicle Electrification systems.

Whether you are designing a pressurized battery pack cooled with the Novec family of engineered fluids from 3M* for EV Mobility, a hazardous environment Generator Set or are simply bringing high currents through a bulkhead that’s at least 0.080” thick, our BFT Style 750 amp terminals, Covers and Accessories  were designed with your application in mind. *(3M, Novec and Novec 7200 are trademarks of 3M Company).

Electrical Information

  • Rated Current 750 amps
  • Peak Current 3,000 amps
  • Rated Voltage 1,000 volts

Mechanical Information

  • Maximum Wire Size 750 MCM
  • Environmental Sealing IP68
  • Operating Temperature -40° C to +125° C
  • Flammability Rating UL94 HB

Commercial Information

  • BFT-P-B Brass, Nickel Plated Brass, Black Insulator
  • BFT-P-R Brass, Nickel Plated Brass, Red Insulator
  • 651A1811 Elastomeric Gasket, 1.95″ diameter, Black
  • 648A1758 Rigid Shell Kit, Black
  • 648A1779 Rigid Shell Kit, Red
  • 639A1830-B Elastomeric Boot, .81” diameter cable opening, Black
  • 639A1830-R Elastomeric Boot, .81” diameter cable opening, Red

Downloads:

  • Download
    Spec Sheet
  • Download
    Drawing
  • Download
    STEP
  • Please fill out the form to download the files.

     

    Please fill out the form to download the files.

Event Tracking done Conversion Tracking done