• Microhm Connector

    The Microhm connector is a two pole, cable-to-cable, low resistance connector containing crimpable aluminum contacts designed for 250 MCM aluminum cable. Its rugged design allows cable rotation for ease of installation of low-strand-count stiff cables typical of solar and other renewable power installations. The ergonomic design delivers passive locking, polarization,…

    View Details

  • Protective Caps and Grommets for 7007 Connector

    Rebling has added a series of accessories to make the 7007 connector even safer. These protective caps and grommets keep dust and objects out, preventing any possibility of FOD (Foreign Object Damage) via the cable openings of the connectors. Although the 7007 is a power connector designed to accommodate four…

    View Details

  • Gauge 29

    Gauge29 is a fixture used for checking the wear on the contact sockets of the 7000 series high power connectors. It is used to check the internal diameter of the contact sockets. Worn or damaged contacts can cause increased contact resistance between power connectors. A high contact resistance will cause…

    View Details

  • Safety/Dummy Receptacles

    Rebling manufactures the 7002-37 Dummy Receptacle, also known as a Stowage or Safety receptacle. It is similar to the 7002 style 1 bulkhead-mounted receptacle, except that it has no conductive terminals. The 7002-37 engages a mating power connector without making an electrical connection. Provides support for a cable-mounted plug when…

    View Details

  • Terminal Adapters

    To complement our avionics-grade, quick disconnect, bulkhead-mounted receptacles itemized on Style 1 Receptacles and Style 2 Receptacles pages, we also offer these same receptacles with threaded terminal adapters attached to the rear side. These specialty receptacles conform to the applicable Mil Specs as well as the specifications of the avionics…

    View Details

  • Dust Covers

    Dust Covers are designed to protect maintenance personnel from inadvertent contact with the terminals of a charged battery. The rigid, white 700220 cover can be easily installed by hand on all Rebling bulkhead-mounted receptacles and meets the MS3509 military specification. This rigid design is also available in custom colors and/or…

    View Details

  • Environmental & EMI Receptacle Gaskets

    Rebling's Receptacle Gaskets are designed to serve two purposes: Provide an Environmental Seal– elastomeric receptacle gaskets prevent fluids, moisture, air and dust from penetrating the bulkhead to which Rebling’s receptacle connectors are attached. This environmental seal prevents penetration into the power source (battery, fuel cell, etc.) and other electronics contained…

    View Details

  • Battery Vent Caps

    Rebling Power Connectors manufactures a line of vent caps for multiple power storage cell technologies. These removable caps seal the electrolyte within the cell and allow venting of the internal pressure of the cell at prescribed pressure ranges. While various configurations and venting pressures are available, the basic construction of…

    View Details